Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Vostro3015_A01.exe
File size: 8.52 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: e768ed4ee8c5442ab0c6483890285c10
SHA1: 3a0742e59a9a844f10e6bd36a55de04fdb7cef91
SHA-256: 0787deaca0aa0ed91775e1094afb98bbcc65bd7e1039bd888def77ded2633c9d
Important Information
Do NOT power off the system until the process of updating(flashing) BIOS has been done.
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Drive and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot Mode option.
3. Change UEFI to Legacy Boot Mode.
4. Go to Exit > Save Changes and restart system.
5. Press F12, then Select USB Storage Drive and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot to take effect.
7. Go to BIOS Setup by pressing F2 key.
8. Change the Legacy to UEFI from F2 > Boot > Boot Mode.
9. Go to Exit > Save Changes and restart system to go back original UEFI Boot Mode.
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required