LSI Logic PERC 4/DC, v.1.18h [2.4.20-16.9], A01
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.PERC 4/DC device driver for RedHat Linux 9.0 errata kernel 2.4.20-16.9.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
1. Maximum sectors for smaller stripe sizes is reduced from 1024 to 128 since it put a constraint on firmware resources resulting in command aborting.
Read MoreVersion
1.18h [2.4.20-16.9], A01
Release date
17 Jul 2003
Download Type
Driver
Category
SCSI RAID
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: A tar file for software installation
File Name: perc4dc-rh9-1.18h-2.4.20-16.9-a01.tar.gz
File Size: 149.3 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file is an archive of compressed files for software installation.
To ensure the integrity of your download, please verify the checksum value.
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Red Hat® Linux 9.0
Applies to
PERC 4/DC
Installation instructions
Custom Instructions for perc4dc-rh9-1.18h-2.4.20-16.9-a01.tar.gz:
NOTE: These instructions are for Linux based systems only
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
NOTE: These instructions are for Linux based systems only. If file is downloaded using a Windows based system, do not extract files in Windows. Copy file to Linux system and use the following instructions to extract files.
1. Browse to the location where you downloaded the file and extract the file using the following commands:
tar xvzf -C /mnt/floppy (Eg: /temp/xxxx.tar.gz)
Installation
1. Install the RPM:
rpm -ivh megaraid-1.18h-1.i386.rpm
2. Reboot the system for changes to take effect.
NOTE: These instructions are for Linux based systems only
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
NOTE: These instructions are for Linux based systems only. If file is downloaded using a Windows based system, do not extract files in Windows. Copy file to Linux system and use the following instructions to extract files.
1. Browse to the location where you downloaded the file and extract the file using the following commands:
tar xvzf
Installation
1. Install the RPM:
rpm -ivh megaraid-1.18h-1.i386.rpm
2. Reboot the system for changes to take effect.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.