Dell Product DSS9600/9620/9630 Rack firmware
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Dell Product DSS9600/9620/9630 Rack firmware
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes -
Not Applicable
Enhancements -
Not Applicable
Read MoreNot Applicable
Enhancements -
Not Applicable
Version
3.75.04, A00
Release date
15 Apr 2020
Download Type
Firmware
Category
Device Firmware
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
File Format: A text file containing customer friendly fixes and enhancements information
File Name: EndUser LicenseAgreementType S_Rev.040512.txt
File Size: 11.4 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c2ffe409366d225552ac6ed58f206b58
SHA1:
88522584d2ed8711c12c71ae9e569116a26e7b0a
SHA-256:
b85aae437264a3f053c9efec6b47fa1ba6610de28b749a06c2fec3dfc87bf333
File Format: A gnu zip file for software installation
File Name: 1M2F9_RMg5update_03.75.04.tar.gz
File Size: 122.14 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of gnu zip files for software installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ed5868098eec15ce52afd0d311604030
SHA1:
8567a0b260bfbcbf568f352e2a5467c0918b0475
SHA-256:
a10d0539642e61bb41d5ebd002bb214f285ba32568c32f289c868fab1df89443
File Format: External release notes
File Name: DSS9000_rack_fw_3.75.04_readme.txt
File Size: 1.68 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
3926f43034fcd4df48702be18094ae34
SHA1:
f0f4b7b8503a28166ddbd1f7d347d87eede1fb84
SHA-256:
e5dd6dbeb1162395323931af6950ce7562e19f5980df6195bd5ceb28aee7954c
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Not Applicable
Applies to
Stark L11 G5.5
Installation instructions
If you are updating the Pantera firmware over the Odin firmware, you need to follow below given steps.
Update via MC CLI
First update the MC firmware via MC CLI using folloing command.
load -source tftp:///MC_OP.d7 -install /
It will take few minutes to update and may report a failure.
Depending on the MC's current active partition the older Odin
firmware or the newer Pantera firmware will boot after update.
Note:
1) If the MC does not reboot automatically, DO NOT
REBOOT IT as this will cause data corruption.
- recovery from a corrupt state will require a serial console connection and performing a UBOOT recovery.
2) During this step all MC config files (mc.conf and manufacturing.conf) will get lost and newer firware will start with the default config files and MC is configured in DHCP.
Now you need to again update the same MC Pantera firmware via MC CLI using folloing command.
load -source tftp:///MC_OP.d7 -install /
After updating MC twice, you can now use the MC with Pantera firmware.
Update via UBOOT
Power on the MC Board and press "Enter" to enter in boot mode
First update the existing uboot using following command.
G5MC> util recover -i uboot1 -f/MC_BL.bin
On next auto reboot, again go into the boot mode by pressing "Enter".
Now update the MC firmware using following command.
G5MC> util recover -f/MC_OP.d7
It will upgrade MC with new Image.
Update via MC CLI
First update the MC firmware via MC CLI using folloing command.
load -source tftp://
It will take few minutes to update and may report a failure.
Depending on the MC's current active partition the older Odin
firmware or the newer Pantera firmware will boot after update.
Note:
1) If the MC does not reboot automatically, DO NOT
REBOOT IT as this will cause data corruption.
- recovery from a corrupt state will require a serial console connection and performing a UBOOT recovery.
2) During this step all MC config files (mc.conf and manufacturing.conf) will get lost and newer firware will start with the default config files and MC is configured in DHCP.
Now you need to again update the same MC Pantera firmware via MC CLI using folloing command.
load -source tftp://
After updating MC twice, you can now use the MC with Pantera firmware.
Update via UBOOT
Power on the MC Board and press "Enter" to enter in boot mode
First update the existing uboot using following command.
G5MC> util recover -i uboot1 -f
On next auto reboot, again go into the boot mode by pressing "Enter".
Now update the MC firmware using following command.
G5MC> util recover -f
It will upgrade MC with new Image.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.