Dell OptiPlex 7040 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : RX8C7

Importance : Recommended

Version : 1.5.4, 1.5.4 Latest version Recommended version Latest and Recommended version

Release Date : 23 Nov 2016

Download Type : System BIOS

Category : BIOS

This package provides the BIOS update for Dell OptiPlex 7040 running in the following Operating Systems: Windows and DOS.

Before updating BIOS to 1.5.4, must upgrade Intel Graphic driver to 10.18.15.4279, A01, or above version to avoid blurred screen after resuming system from sleep stage. If blurred happens, please force to restart the computer then upgrade Intel Graphic driver to 10.18.15.4279, A01, or above version.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_7040_1.5.4.exe

File size: 8.19 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 36d483b12ba1789ec9f9c1bbe6564ca8

SHA1: dc96b9e2671a695af529dd349b1fafe33e80f06e

SHA-256: e8dcb922db9302df8be8196304c74b11c0c6331b0fab135d09917dd1fdf4f881

Download .EXE

Installation instructions

BIOS Update Executable for Windows/DOS

Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it

Reboot will be required

Dell OptiPlex 7040 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to