LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.3.01.00, A05

-In order to create this diskette, it must be downloaded to and executed on a system running
Microsoft Windows.

- Support Pack 2 is required for Netware 6.0.

- Support Pack 5 is required for Netware 5.1.

- Netware 6.0 installation on a multiprocessor platform will
fail due to absence of the latest Support Pack files. To
successfully install Netware 6.0 on such a platform, you
will need to boot into the driver disk created above
after completing the server installation. Refer to the
install instruction notes provided.

- Installation of Netware 6.0 on a uniprocessor system or
Netware 5.1 on both uniprocessor as well as multiprocessor
systems will be successful. The support packs, however,
are required updates for stable functionality of the
driver.

- Both instances of the driver must be loaded for
dual-channel chips instead of a single instance.

- This version of the driver will work with Integrated
Mirroring MPT firmware. However, IM volumes are not
supported therefore no volumes should be configured.

- Cabling and/or test conditions that result in numerous
SCSI Bus resets may cause the OS to deactivate devices.
Device rescan and volume remount may be required.

Custom Instructions for lsi-nw30100-a05.exe:

===================================
LSI Logic 1020/1030 PCI SCSI Driver
===================================

This program creates a Netware 5.1 and Netware 6.0 driver
diskette for the LSI Logic SCSI controllers. You will need a
formatted 3 1/2 inch floppy diskette for the following
procedure.

1) Download the file to a directory on your hard drive. The
file downloaded is a self extracting executable.

2) Double click on the file to run the executable.

3) Click on the setup button.

4) Follow the on screen instructions to create the driver
diskette.

Performing a new installation of Netware
----------------------------------------

1. Boot to the Novell Netware Installation CD.
2. For Netware 6.0:
Follow the instructions on the screen until you get to
the type of installation selection.
For Netware 5.1:
Skip to step 4.
3. Select Custom Install.
4. Follow the instructions on the screen until you reach the
"Storage Driver Support" screen. This screen is used to
add, change or delete drivers.
5. Select "Storage Adapters" on the "Storage Driver Support"
screen.
6. Press "Insert" to add unlisted drivers. Press "Insert"
again. A path displays.
7. Insert the driver diskette created above into the floppy
drive and press "Enter".
8. The system finds the LSIMPTNW.HAM driver for the LSI
Logic Ultra320 SCSI adapters.
9. Return to the Driver Summary screen. Continue the
installation.

NOTE: After installing Netware 6.0 on a multiprocessor
system, it will hang on bootup. This is due to the
absence of the latest Support Pack files. To bring the
system up, boot from the driver disk. This will copy
the essential files and boot the server. Once the
server is up and running, it is recommended to load
the latest support pack to ensure a stable
configuration.

Adding the LSI Logic SCSI Driver to an Existing Netware Server
--------------------------------------------------------------

NOTE: The LSI Logic SCSI Driver requires the latest support
pack to be installed on a Netware 6.0 system. If the
support pack files are missing, the server will hang
on bootup.

1. At the server console prompt, type "NWCONFIG" and press
"Enter".The "Configuration Options" screen is displayed.
2. Select "Driver Options" and press "Enter".
3. Select "Configure Disk and Storage Device Options" and
press "Enter".
4. Select "Select an additional driver".
5. The "Select a Driver" screen displays. Press "Insert".
6. Press "F3" to select a new path.
7. Type "A:". Insert the driver diskette created above into
the floppy drive and press "Enter".
8. The system will display the LSIMPTNW.HAM driver found on
the diskette.
9. Select the driver and press "Enter".