Download Files
File Name: R151359.EXE
File size: 2.23 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 45ffa6a5d569039868fd55612a3ff58d
SHA1: 08568525d8eea1758f2b24d714ac8da813720696
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
Windows Vista, 64-bit
Windows XP
Windows XP, 64-bit
Installation instructions
1. Make sure the printer is in the Ready state, i.e. the ReadyData light on the printer is solid green.
2. Go to the Printer Embedded Web Server by opening a web browser and entering the IP address of the printer into the address field, then click GO
3. Once the embedded web page has displayed, click the Printer Settings link on the left frame of the web page. The Printer Settings Page will be displayed.
4. Under the Other Features section on the right side of the page, click the Update Print Server Firmware link.
5. On the Update Print Server Firmware page, click the Browse button to open the Browse for File window. Browse to the location where the files were saved and select the file BRQP205.ffb, then click the Open button.
6. On the Update Print Server Firmware page, verify the File Name: entry contains the file BRQP205.ffb, then click the Flash button. The Status changes from Idle to xx Percent Sent.
7. Once 100 percent of the file has been sent to the printer, the firmware in the printer will be updated. DO NOT POWER OFF THE PRINTER WHILE THIS IS OCCURING.
8. The printer will automatically perform a power on reset when the firmware has successfully updated. This normally takes about 60 seconds.