Toshiba EE06 for model number(s) AL14SXB30ENY, AL14SXB60ENY, AL14SXB90ENY, AL14SXB30EAY, AL14SXB60EAY and AL14SXB90EAY.

Fixes:
- Change the DOW setting value from 1Dh to 1Eh for AL15SE ATI issue.
- If HDD receive command while HDD is executing Read Retry Step 50, HDD may execute internal reboot and report sense 06-29-04(dell) or 04-29-04(emc).
- 512e and 4k format may become long latency due to DRAM management. Temporarily some DRAM data for user is not used for media cache writing called PWC in the cycle. Full DRAM data for user will be used in case of PWC.
- Support new DEFT function with ENG0011851_(DEFT)_A05 draft3
- Apply a countermeasure of HFW issue on AL14SX TCRDT.
- In case of read command for the same write LBA address following to long consecutive sequential write commands (no other command comes during the write), the HDD sends wrong data from cache area. The boundary of write is one-64th of the HDD capacity. (i.e. HDD capacity=1.8GB, boundary=28MB=54,942,430sectors)
-If HDD detects Logical Block Reference tag check Failed in an READ command, HDD reports sense code 03-11-02 instead of 0B-10-03.
(4Kn and PI type 2 format HDD only)
- In case command aging timer expire and I T nexus loss occurs at the same time, HDD retry to execute the command expired by aging timer, even if the command has already aborted by I T nexus loss. As the result, the HDD report sense code, 06-29-04.
- When NOTIFY(Enable Spin Up) comes, the drive may not be able to start spinning up and report the sense, 02_04_11.
- If the HDD lost power supply while the drive is executing retry of ATI, one write splice sector may be remained. Please refer the white paper.
- When HDD receive NOTIFY (Enable SpinUp) and STAT STOP UNIT command, it starts motor spindle up. The HDD may report sense 02/04/02 instead of 02/04/01 if MODE SENSE and MODE SELECT command unexpectedly come before HDD ready.