LITE-ON IT Solid State Drive Firmware Update
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the firmware for LITE-ON IT LCS-128L9S 2.5 7MM 128 GB, Revision HC7110C Solid State Drive (SSD). Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Improves the compatibility of the SSD in Low power mode.
Read MoreVersion
HC7110D, A02
Release date
20 May 2015
Download Type
Firmware
Category
Storage
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: ZipPack External
File Name: LCS-128L9S-HC7110D_ZPE.exe
File Size: 1.56 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
97d073dae70a9c9186e79a31bbcef29e
SHA1:
b12f77ae7a46f420affb25f33c6fcc3882b0bb05
SHA-256:
ec61484142d209af39fad532b5117fb7935dda4fa4472207d4374969a549c828
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
It is recommended that you back up your data and switch to AC power after doing so. Use the SSD, whose firmware has to be updated, as a backup or an external storage device drive using the USB port. The new firmware can be activated only after restarting the system or a power reset.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Applies to
LiteOnIT LCS-128L9S
Installation instructions
Firmware upgrade using the Windows utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Download
1. Click Download File to download the file.
2. When the download is complete, unzip the file.
The file explorer open pointing to the directory that contains the downloaded file.
Upgrade Procedure
1. Close all applications and save our work before the firmware upgrade process.
2. Go to the location where you have downloaded the package and double-click the file to start the upgrade process
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Download
1. Click Download File to download the file.
2. When the download is complete, unzip the file.
The file explorer open pointing to the directory that contains the downloaded file.
Upgrade Procedure
1. Close all applications and save our work before the firmware upgrade process.
2. Go to the location where you have downloaded the package and double-click the file to start the upgrade process
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.