Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Latitude 3490/3590 KBL System BIOS
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell BIOS update for Dell Latitude 3490 and 3590 systems that run the Windows and DOS operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
-N/A
Enhancements:
- Replaces Absolute Software service from Computrace to Absolute Persistence Module service.
- Enhances Wake on LAN to PXE (Preboot Execution Environment) feature.
Read More-N/A
Enhancements:
- Replaces Absolute Software service from Computrace to Absolute Persistence Module service.
- Enhances Wake on LAN to PXE (Preboot Execution Environment) feature.
Version
1.9.3, 1.9.3
Release date
28 Nov 2018
Download Type
System BIOS
Category
BIOS
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: CPG BIOS Executable for Windows/DOS
File Name: Latitude_3490_3590_1.9.3.exe
File Size: 7.34 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c965828e23f8a4db4168a713d09b4a73
SHA1:
7a565ffd969ddfd0f475da1d81ccb747e9df4ab4
SHA-256:
c1f5d1fac42e7eb66f55b603b6860428dd30695c20f713df294184bb6defdf1a
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Users are advised not to downgrade BIOS EXE / Recovery (RCV) to the version 1.3.0 or prior.
Applies to
Latitude 3490/3590
Installation instructions
Updating the BIOS through Windows
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Go to Exit > Save Changes and reboot system.
Note 1: You must provide a bootable DOS USB drive. This executable file does not create the DOS system files.
Note 2: Ensure that you suspend BitLocker encryption before updating BIOS on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
1. Click Download File, to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
Windows System restarts automatically and updates BIOS at the system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with Legacy boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After BIOS update is completed, system will reboot automatically to take effect.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled)
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Save Changes and reboot system.
5. Press F12 and then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable file is located.
DOS System restarts automatically and updates BIOS at system startup screen.
After the BIOS update is finished, system will reboot automatically.
7. Go to BIOS Setup by pressing F2 key and go to General > Boot Sequence > Boot > Boot List Option.
8. Change Legacy to UEFI Boot Option.
9. Go to Exit > Save Changes and reboot system.
Note 1: You must provide a bootable DOS USB drive. This executable file does not create the DOS system files.
Note 2: Ensure that you suspend BitLocker encryption before updating BIOS on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.