Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Latitude_7370_1.3.6.exe
File size: 9.19 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 6cb4dea4cdf801046a0ef37cf22c7ade
SHA1: 1550f782de4af53b44c7abddb5d642c518fff176
SHA-256: 38665b3e7777d978dcc268ca0845d4c6316abc7367568c588158827297dd5f3c
Fixes & Enhancements
Fixes:
- Fixed USB-C to USB-A dongle still work when disable Thunderbolt and External USB ports support in BIOS Setup Menu.
- Resolved Dell Thunderbolt Dock issues.
- Addressed Intel CPU performance issue.
Enhancements:
- Updated Intel CPU microcode.
- Updated Embedded Controller firmware.
- Updated Intel Video BIOS & UEFI Graphics Output Protocol driver.
- Updated Intel Management Engine Firmware.
- Updated Dell Diagnostics program.
- Added embedded LAN MAC address display item in BIOS setup menu.
- Removed Data wipe support when NVMe SSD attached.
Important Information
Important:
- Not suggested/allowed to downgrade BIOS to the version before 1.3.6.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required