ML3 Firmware Package A10

Restart required

Driver Id : R05HR

Importance : Recommended

Version : 1501-B00, A10 Latest version Recommended version Latest and Recommended version

Release Date : 29 Apr 2022

Download Type : Firmware

Category : Tape Automation

ML3 library and drive firmware.
Library Firmware = MR3U_1.5.0.1-B00
LTO6 Drive Firmware = KAJ8 FH FC, KAJ9 HH SAS and FC
LTO7/8 Drive Firmware = P380 FH FC, P381 HH SAS and FC
LTO9 Drive Firmware = P370 FH SAS and FC, P371 HH SAS and FC

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: ML3_A10_R05HR_ZPE.exe

File size: 146.12 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: cb052638acc202e10e2ec2fda5b2d587

SHA1: 4b4d86dcd990b307d1fa900d42a41cda21b0f2e6

SHA-256: fba98cdb1d25c695942690a509e39e876f9592aff755ff6cb7a169ac9897daae

Download .EXE

Installation instructions

Zip Pack Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the
file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and
double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were
successfully unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Use ITDT or ML3 RMU to update the drive firmware and the ML3 RMU to update the Library firmware
2. Enter a new password on first login that adheres to complex password criteria as shown in Users Guide.

ML3 Firmware Package A10

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to