Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Inspiron_5567_5767_1.0.1.exe
File size: 6.41 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 2f787c052e4b6865ab9eebfb40f44df1
SHA1: cd66bffad965afc66e51ad8b327da97e8a1fe780
SHA-256: 1eca8cf1c2439912d61400a7ccc7ff72e7c158152f756f32b8b8513be5029bab
Fixes & Enhancements
Fix:
- [BITS282500][Ubuntu][Gamora-KBL] KB backlight auto turn off and hotkey cannot be used when plugging AC.
- [BITS280404][Ubuntu][Gamora KBL][amdgpu] System failed to resume from suspend with amdgpu loaded.
- [BITS292320]DVT2-Gamora-KBL:SUT show Recovery connected USB mouse&device if disable External.
Enhancements:
- Update Ec to 01.00.02.
- Update VBIOS for AMD DDR3 2G.
Supported Operating Systems
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Reboot will be required