Dell Networking N1500 Series, Firmware Version 6.3.0.9,A10

Restart required

Driver Id : Y7H6K

Importance : Recommended

Version : 6.3.0.9, A10 Latest version Recommended version Latest and Recommended version

Release Date : 16 May 2016

Download Type : Firmware

Category : Network, Ethernet & Wireless

This is the maintenance release of Dell Networking N1500 Series switches.

Please refer to the Release Notes for additional details which is included in the zip file - "Dell_Networking_6.3.0.9_Release_Notes"

Download Files

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: N1500ReadMev6.3.0.9a10.txt

File size: 3.03 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: 6578f1943eef9c84e4ce1f2356d64152

SHA1: 4f94f3e1a304edd6c99567b886c77662f5a21bf0

SHA-256: a1f14b285c5961c2ff332b10bcad0d720d8baba6caf6ee3a5a307da794401944

Download .TXT

File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.

File Name: N1500v6.3.0.9a10.zip

File size: 27.96 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 5daeb7c530cd9228eb4e77468de136bb

SHA1: 79131f6228ca251157b936a333b66f480c875d60

SHA-256: fd3fc38e1962393c44f9857fc8de3fd4332712cefa5fb782b3837f7f5f18050d

Download .ZIP

Fixes & Enhancements

New Features & Enhancements:
None

Fixes:
Case-ID Summary
1039629 N2048P/6.2.7.2-N2048P with 6.2.7.2 has experiened a spontaneous reboot
1048238 6.3.0.6-N2000 Switch is non-responsive to management access (SSH/Console)
1047819 6.3.0.6-PVST logs (STP TCNs and STP state change) not getting displayed after upgrade to 6.3
1037327 6.3.0.3-UTEP-Port-security-Last violation MAC address is not listed when port shutdown
1037325 6.3.0.3-UTEP-"show port-security all" CLI command output is misleading
1039920 N2048/6.2.7.4/N2048 dot1x MAB Periodic Re-Auth Failures
1047200 Update Hiveagent to version 2.62
1050364 Re-enable starting of HiveAgent on bootup
1050369 "port-security violation shutdown" command is not retained after save and reload

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.9_Release_Notes"

Important Information

After upgrading to 6.3.0.9, the switch interfaces may go to D-Down state instead of STP BLK state when loop detected in the network. So we recommend to disable "loop-protection" feature globally and under all switch interfaces using the command "no keepalive" and save configuration. Also configure err-disable recovery feature by using the commands "err-disable recovery cause all" and "err-disable recovery interval 30" globally to recover the ports from D-Down state. If desired user can disable the err-disable recovery feature after ports are recovered from D-Down state by using the command "no err-disable recovery cause all"

Dell Networking N1500 Series, Firmware Version 6.3.0.9,A10

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to