SanDisk Z400s Series SSD Firmware Update

Restart required

hi testing

Driver Id : 2DW4D

Importance : Recommended

Version : Z2329012, A02 Latest version Recommended version Latest and Recommended version

Release Date : 25 May 2016

Download Type : Firmware

Category : Storage

This package provides the firmware for SanDisk Z400s Series Firmware Update and is supported on Alienware, Inspiron, Latitude, Precision, Optiplex, Vostro and XPS models running the following Windows operating systems: Windows 7, Windows 8, Windows 8.1 and Windows 10.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: SanDiskSSDUpdater_Z2329012_ZPE.exe

File size: 2.71 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: f513ca202030889ea5e2c934be2aba17

SHA1: aca97561b4128983a91795658b59cbabc32b19c6

SHA-256: 3e598b1ab427bd0ee4656039b7bb2434692748bba36a158b809ba756f4284a3a

Download .EXE

Compatible Systems

Alienware 13 R2

Alienware 15 R2

Alienware 17 R3

Inspiron 11 3162/3164

Latitude 3450 (End of Life)

Latitude 3460

Latitude 3470

Latitude 3550 (End of Life)

OptiPlex 3030 All-In-One

OptiPlex 3040 Micro

OptiPlex 3040 Small Form Factor

OptiPlex 3040 Tower

OptiPlex 3240 All-in-One

OptiPlex 5040 Small Form Factor

OptiPlex 5040 Tower

OptiPlex 7040 Micro

OptiPlex 7040 Small Form Factor

XPS 13 9350 (End of Life)

Installation instructions

1. Save the SanDisk SSD Updater executable file in a folder or directory on the target system.
2. Double click on the executable file to launch the application. Administrator rights will be required to perform this step.
3. The tool will scan the system and list all supported and detected SanDisk SSDs. If an SSD is not listed, click on the Refresh icon to rescan the system. If a Refresh fails to detect the SSD, check the SATA connection and try again.
If a supported target SSD is not detected, the SanDisk SSD Updater Tool will list the supported SSD models and firmware versions.
4. Select the drive that needs to be updated by clicking on the drive name.
5. Details about the drive will be shown on the right panel. The firmware update will be allowed for targeted models and firmware versions of SanDisk SSDs.
6. Click Update Firmware to start the firmware update.
7. A warning message will be displayed. Click Cancel to return to the drive list page, or click Update Firmware to continue.
8. After a successful firmware update, the host system and drive must be powered off to activate the new firmware.
9. Relaunch the application after powering up the host system to confirm that the firmware is up to date on the target drive.

SanDisk Z400s Series SSD Firmware Update

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to