Download Files
File Format: Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
File Name: Power_Firmware_8NDRK_WN64_07.18.7F_02.EXE
File size: 7.73 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 6d371fe6bea115677cd455f7c0366bbf
SHA1: 777fb0bbf19129b69111fa2e8d4bf4a4fbe7f656
SHA-256: 4393f581fc5398cb4f0ce570cb1aaa4b27c312619f38f410ab41e38479e51319
File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
File Name: Power_Firmware_8NDRK_LN_07.18.7F_01.BIN.sign
File size: 226 Bytes
To ensure the integrity of your download, please verify the checksum value.
MD5: 382c338b22312557db300129bf433947
SHA1: 241d812a3c1860f1744c16188bc195f54ae7dad3
SHA-256: c950f1e4718716373892b841e7695fc2132628674d0f3f9a0fc9672929c3d278
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: Power_Firmware_8NDRK_WN32_07.18.7F_02.EXE
File size: 6.75 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 444cc73116ffe1773f495306255031fb
SHA1: 58d0596b02f777f37ace1bdfa8cb094f39a2bbe0
SHA-256: f7ff8d30ad8d8053f4ab265e904e1cb43cf63c5d152ba6d6bb31bce1637ed6b6
File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
File Name: Power_Firmware_8NDRK_LN_07.18.7F_01.BIN
File size: 2.09 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: ef74fc423c274504cae40d8f4ca94bfb
SHA1: cd2571b58cb9acde4c803303ac6d61d1678ff78a
SHA-256: 25b7354391b6be92c57f97438d6cb2a4105318abd3891eeae01b3addf2036eef
Fixes & Enhancements
Fixes:
- Provides fix on mistriggering of Fan Fault when input voltage is removed on 1 of the 2 PSUs installed in the system.
Notice: If Fan Failure error occur prior PSU FW Update, to clear the Fan Failure Error after PSU FW Update - Input Voltage on all PSU installed in the system needs to be removed and recycled.
Enhancements:
- Not Applicable
Important Information
IMPORTANT: After successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the PSU firmware. Once the firmware update is complete, the managed system will reboot automatically.
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter into an irrecoverable state and will cause managed system not to boot.
Supported Operating Systems
Installation instructions
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION! Performing an AC power cycle or cold boot during power supply firmware update, forces the power supply unit to enter an irrecoverable state and will cause managed system not to boot.
IMPORTANT:
After a successful power supply firmware download, the managed system will turn off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to disturb/restart manually the system, wait until the PSU FW update finishes. (Update time may vary depending on number of PSU for update, it may vary approximately from 10 mins to 20 mins.Margin should be added to ensure the Dell Update Package (DUP) is not interrupted. Once the firmware update is complete, the managed system will reboot automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Applies to
Delta 350W PSU (PN: Y8Y65)