LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.1.09.11(IA-64), A00

Changes applicable to MPT IO 1020/1030 solutions since native (1.08.18) W2K3 driver:
________________________________

• Added handling for getting a check condition on an OS issued request sense command (no SenseInfoBuffer).
• Fixed check of ImageSize for F/W download boot in MPI_DIAG_RESET
• Fixed data buffer address calculation for MPI pass through writes on 64-bit platforms (would cause improper data to be written on MPI IOCTL calls).
• Fixed problem with access to Manufacturing Page 0 if no NVDATA available (would result in a bluescreen if valid NVDATA was not available).
• Added I/O throttling per device to avoid overrunning device queue depths (eliminate multiple Queue Full returns and Event 11/15 errors in event log).
• Changed AdapterRestart routine to perform Domain Validation on parallel SCSI. (ensures externally powered U320 drives run at U320 speed on Resume from Standby)
• Added checks for NULL pointers on all cached MPI config pages.
• Added unmasking of interrupts in LSImpiIsr when processing a doorbell interrupt
• Check SCSI Port Page 2 Domain Validation bits to either disable Domain Validation or limit Domain Validation to Inquiry only checks.
• Changed LSImpiReset routine to always poll on ISR until reset reply is received.