Dell Networking N3000 Series, Firmware Version 6.2.7.2,A10

Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Both Dell Networking N3000 and N2000 Series switches share the same firmware image file (N3000_N2000v6.2.7.2.stk). If your N3000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware version 6.2.7.2 as it contains multiple bug fixes and enhancements.

After upgrading the switch firmware version to 6.2.7.2, the boot code update is required on N3000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N3000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.7.2_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.7.2 Firmware"
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

New Features & Enhancements:
None

Fixes:
Case ID Summary
921634 N4xxx - 6.2.0.5 - Packet Loss on OOB interface, also with firmware 6.2.1.3
946636 N3000 - "show supported switchtype" lists both N2000 as supported switch
951836 N4032 - 6.2.6.4 : Unable to unconfigure ipv6 hop-limit
983834 N4032F - 6.2.6.6 - " broad_hpc_drv.c(4428) 1396 %% unit 0 PORT_CBL_TABLE entry 0 parity error"
974414 N3000 - 6.2.6.8 - N3000 Stack - Configuration loss after stack failover
976065 N2048 - 6.2.6.6 Enabling UDLD shuts the ports down and changes state to D-Disable
980030 N4000 - 6.2.6.8 - Switch crash "emWeb" when ran "do show running-config interface te1/0/8 all"
980035 N-Series PoC - Question on DHCP Relay Source & Destination Port
966115 N-Series - 6.2.6.6 - Default power management mode (Dynamic)
966290 N4K Crash Dump analysis firmware 6.2.0.5
974421 N2000 - 6.2.1.6 - N2048P Stack member "dot1s_task" crash
981140 N-Series - 6.2.1.6: N-series goes to u-boot after customers select Option 13 from Boot Menu
975088 N3024/6.2.6.6 : Login timeout occurs when tacacs timeout is configured for one second

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.7.2_Release_Notes"
Read More

Version

6.2.7.2, A10

Release date

30 Nov 2015

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N3000v6.2.7.2a10.zip
File Size: 22.63 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c5982356b0b2df2ab31b144c1e9ff741
SHA1:
fc72fa96c55c55551d46716a571d69e2b7f2c98e
SHA-256:
043f6742672eeb0712e306204c72566e9c1ac8e5d7472e5a8c23af515f8a851a
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N3000ReadMev6.2.7.2a10.txt
File Size: 3.17 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fe5828a02bd8c2951e597f9c3ba1df90
SHA1:
44bb7884d4f4525a40acd133d353732a63485288
SHA-256:
9320a00a5de77eca2a724c2014627b224e8aee10403995ef2dc1ac15f33764e3

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
New Features & Enhancements:
None

Fixes:
Case ID Summary
921634 N4xxx - 6.2.0.5 - Packet Loss on OOB interface, also with firmware 6.2.1.3
946636 N3000 - "show supported switchtype" lists both N2000 as supported switch
951836 N4032 - 6.2.6.4 : Unable to unconfigure ipv6 hop-limit
983834 N4032F - 6.2.6.6 - " broad_hpc_drv.c(4428) 1396 %% unit 0 PORT_CBL_TABLE entry 0 parity error"
974414 N3000 - 6.2.6.8 - N3000 Stack - Configuration loss after stack failover
976065 N2048 - 6.2.6.6 Enabling UDLD shuts the ports down and changes state to D-Disable
980030 N4000 - 6.2.6.8 - Switch crash "emWeb" when ran "do show running-config interface te1/0/8 all"
980035 N-Series PoC - Question on DHCP Relay Source & Destination Port
966115 N-Series - 6.2.6.6 - Default power management mode (Dynamic)
966290 N4K Crash Dump analysis firmware 6.2.0.5
974421 N2000 - 6.2.1.6 - N2048P Stack member "dot1s_task" crash
981140 N-Series - 6.2.1.6: N-series goes to u-boot after customers select Option 13 from Boot Menu
975088 N3024/6.2.6.6 : Login timeout occurs when tacacs timeout is configured for one second

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.7.2_Release_Notes"
Dell N3024
Dell N3024F
Dell N3024P
Dell N3048
Dell N3048P
(1) Download the zip file - N3000v6.2.7.2a10.zip
(2) Extract the image file "N3000_N2000v6.2.7.2.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.7.2 Firmware.pdf" extracted from zip file.

Reboot will be required

Need help with network connection issues?

Find a solution in Dell's network troubleshooting guide

Drivers help and tutorials