Download Files
File Name: OS_Web_v8.6_027_5070_PCoIP_JPN.zip
File size: 56.25 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 4c9d3d7c00ba1c54cb4dbc99d43df066
SHA1: e3900fa00854d72cac4679bed02216d646dc1281
SHA-256: 68f4eb1675adf304c801eb63cba1db3f858d575c2112b3e3a24774ae3721e511
Fixes & Enhancements
Enhancements:
- Updated the Citrix RTME package to version 2.8.
- Updated the VMware Horizon package to version to 5.1.
- Updated the Flash Redirection package to version 1.28.
- Updated the VMware Horizon client from version 5.0 to version to 5.1.
- Supports the relative mouse feature in a Blast session.
- Supports USB splitting for Blast protocol.
- Added grace period support to skip the second authentication factor.
- Supports Amazon WorkSpaces using direct connection mode.
- Supports the Omnikey 5321v2 device.
- Supports Rutoken smart cards.
- Added the option to disable on-board serial ports using INI parameters.
- Improved the security for CA validation on Wyse Management Suite.
Fixes:
- Fixed issues from the previous ThinOS release. For more information about fixed issues, see the Dell Wyse ThinOS 8.6.x Operating System Release Notes.
Important Information
Do not power off your thin client until the installation is complete.
Supported Operating Systems
Installation instructions
Installing an image by using FTP server:
1. Download the latest ThinOS firmware & latest ThinOS packages that corresponds to your thin client model. If the firmware & packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files.
Note: Download the JVDI.zip package. Unzip it and ensure to read the EULA agreement in readme file.
2. Place the extracted firmware files in the C:\inetpub\ftproot\WYSE\wnos folder, and the packages to C:\inetpub\ftproot\WYSE\wnos\pkg on your FTP server.
3. Create a wnos.ini text file (using a text editor) in the C:\inetpub\ftproot\WYSE\wnos folder with the following INI parameters:
Autoload=1 loadpkg=1 Addpkg=TCX,FR,horizon,JVDI
4. Save the wnos.ini file.
5. To locate the ftp File Servers/Path from Wyse 5070 thin client, do the following:
5.1. On the ThinOS client desktop, navigate to System Setup > Central Configuration > General.
5.2. In the General tab, enter the IP address of the FTP server or directory, username & password. If FTP server supports Anonymous, enter the username as Anonymous, and enter the pre-configured password. You can also leave the username and password fields blank.
5.3. Click OK.
6. Restart the thin client and wait until the auto-installation of packages is complete.
Installing an image by using Wyse Management Suite:
1. Download the ThinOS firmware file to a desired location or the Wyse Management Suite server.
2. Log in to Wyse Management Suite and navigate to the Apps and Data page.
3. Click OS Image Repository and select ThinOS.
4. Click Add Firmware File and browse the Firmware file. Provide an appropriate description and click Upload.
5. To update Group of devices, do the following:
5.1 Click Groups & Configs and select the group where the device is present.
5.2 Click Edit Policy-->ThinOS-->Advanced Configurations.
5.3 Click Firmware Upgrade and select Configure this item.
5.4 Select the Device Model and Firmware File.
5.5 Click Save & Publish.
6. To update a single device, do the following:
6.1 Go to the Devices page and click your preferred device.
6.2 On the Device Details page, click Create/ Edit Exceptions.
6.3 Click Advanced Configurations.
6.4 Click Firmware Upgrade and select Configure this item.
6.5 Select the Device Model and Firmware File.
6.6 Click Save & Publish.
Installing an image by using Wyse Device Manager (WDM):
1. To add device to the WDM server, on the ThinOS thin client, navigate to Desktop->Shutdown.
2. Select the Reset the system setting to factory defaults check box.
3. Select the Restart the system radio button, and click OK.
4. Log in to the WDM server after the ThinOS device is restarted.
5. Click Devices, and verify if the device is discovered and displayed on the Devices page in WDM.
6. Download the ThinOS file (Ex: ZD10_wnos) to C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
7. To configure the FTP server path for image upload, create the WNOS.ini file in C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
8. Create the INI parameters with the following values:
SignOn=0 and autoload=1.
9. To allow WDM to use FTP when updating devices, log in to the WDM server with valid admin credentials.
10. Navigate to System-->WyseThinOS.
11. Enable the WTOS INI Path upon check-in settings.
12. Click the Save button to save the settings.
13. To allow the client to check in to the WDM server, on the ThinOS client, navigate to Desktop-> System Setup-> Central Configuration.
14. Click the WDA tab and then click the Protocol priority as WDM radio button.
15. Select all the Discovery Settings check boxes, such as DNS_NameRecord, DNS_SRVRecord and DHCP_Inform.
16. To set the FTP server path in ThinOS clients, click the General tab.
17. Enter a valid file servers/Path as configured (Ex:10.XXX.XXX.XXX/Rapport/WTOSCONFIG).
18. Click OK.
19. To initiate ThinOS image update, navigate to Desktop -> Shutdown.
20. Click the Restart the system radio button and then click OK.