DELL OEM ID Module for PowerEdge T130

INSTALLATION:
1) Extract the .pm from the 'CustBSU' self-extracting .exe.
2) Login to iDRAC web GUI and navigate to 'Update and Rollback' link on left pane.
3) Using 'Firmware Update' tab, browse to the 'CustBSU' .pm file and upload it.
4) Under the 'Update Details' section, select your .pm file.
5) Click the Install button.
6) Go to 'Job Queue' tab and wait for your install job to change from 'New' to 'Completed.'
7) Navigate to the 'Overview' link on left pane. Under 'Quick Launch Tasks,' select 'Reset iDRAC.' Wait 3-4 minutes for the iDRAC to reboot before proceeding.
8) Reboot the system. Wait for the reboot to complete, which will be followed by one more self-reboot before you see the updated BIOS splash logo.
9) Verify that the tab --> 'System Inventory' --> 'Firmware Inventory' shows 'Identity Module' as a component.
10) Verify the branding changes are displaying as expected.

############# Identity Module DUP ( aka PM DUP) ##############

Note:
1) None of the below methods using DUP are supported for users upgrading from OEMReady rev 1.0 to rev 1.01. These are listed here for
those users trying to switch back to rev 1.01 from a later revision of OEM Ready.
2)For users upgrading from OEMReady revision 1.0, using 'Cust' .pm file is the only supported method.
3) All below methods are for updating installed Identity Module and not for Fresh Install.

PREPARATION:
1) Ensure that you have IdentityModule DUP for the appropriate 12G platform and that your system is already debranded/rebranded.
2) Ensure that you have iDRAC revision 1.30.30 or later and Lifecycle Controller revision 1.1.1.18 or later.

INSTALLATION (OS DUP method) :

1) Refer to 'Dell Update Packages Version 7.2 User's Guide' or later found on Dell's support site http://www.dell.com/support/home .

INSTALLATION (iDRAC GUI method):

Note: Only Windows DUP are supported for this method.
1) Login to the iDRAC GUI. Navigate to 'Update and Rollback' link and using the 'Update and Restore' tab, browse to the Windows DUP on your machine.
2) Upload the Windows DUP and confirm the Package successfully downloaded message under Update details.
3) Click on Install next reboot or Install and Reboot button as appropriate.
4) Navigate to Job Queue page and confirm that the job completed.
5) Let the iDRAC reboot complete (depending upon install option you chose in step 3).
6) Reboot host.
7) Verify the branding changes are working.

Reboot will be required