Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: M14R2A12WIN.exe
File size: 4.47 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 118a6c7d65b0e5c7755f271a39b40644
SHA1: e7ac92d37f7cb7928754250054c01265a1936d25
SHA-256: 3ff840b9b4adddc7e287b54fc616c977476c1d2797f33656c8b2e905d4fb7d5f
Fixes & Enhancements
Fixes
-Not Applicable
Enhancements
-Enhanced EC set GPU to P8 right after CPU LFM mode cannot solve system OCP problem in DC mode.
Supported Operating Systems
Windows 7, 64-bit
Windows 8, 64-bit
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. After BIOS update finished, Windows System will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode Non-Windows users
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled Non-Windows users
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Exit Save Changes and reboot system.