Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Alienware13_R2_1.2.8.EXE
File size: 9.17 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 6fe58a1ad4faa99ad9bef431d3af1622
SHA1: 901b82f8aa8984d0e89a93283c8b1723b45af6ed
SHA-256: 4695f0dbe74b9ff080001e1f3d1e9088c78241562785d10b55c217cca47893c5
Fixes & Enhancements
[BIOS]
-Update ePSA 4300.21
-Set Standard Charge as setup menu default
Supported Operating Systems
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Reboot will be required