Dell G5 5090 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : 39JC0

Importance : Critical

Version : 1.1.2, 1.1.2 Latest version Recommended version Latest and Recommended version

Release Date : 03 Dec 2019

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. It is supported on Dell G5 5090 system that runs the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: G5_5090_1.1.2.exe

File size: 8.17 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: dfeb27737b973265e43bc274f3431749

SHA1: e0d629108a774f9a4dc9a6cbb411d424062bb615

SHA-256: b90994ff61c1062946ecc528aca3ac686e0fb12ad0f4b3e1a982c087efc84aaa

Download .EXE

Fixes & Enhancements

Fixes:
- Firmware updates to address security advisories INTEL-SA-00240 (CVE-2019-0151) and INTEL-SA-00164 (CVE-2019-0184).
- Firmware updates to address security advisory INTEL-SA-00241 (CVE-2019-0169, CVE-2019-11105, CVE-2019-11104, CVE-2019-11103, CVE-2019-11090, CVE-2019-0165, CVE-2019-0168, CVE-2019-11087, CVE-2019-11101, CVE-2019-11106, CVE-2019-11108, CVE-2019-11147, CVE-2019-11088, CVE-2019-0131, CVE-2019-0166, CVE-2019-11100, CVE-2019-11107, CVE-2019-11086, CVE-2019-11132, and CVE-2019-11131).
- Firmware updates to address Intel security advisories INTEL-SA-00219 (CVE-2019-0117), INTEL-SA-00220 (CVE-2019-0123), and INTEL-SA-00270 (CVE-2019-11135).
- Firmware updates to address Intel security advisories INTEL-SA-00220 (CVE-2019-0124), INTEL-SA-00260 (CVE-2019-0154), and INTEL-SA-00254 (CVE-2019-0185).
- Fixed an issue with preboot TPM detection and error logging.
- Removed the IpSec driver and application.
- Fixed the issue where incorrect options are displayed when BIOS is set to Legacy Boot Mode.

Enhancements:
- Added an enhancement to extend the BIOS password configuration measurements into the TPM.
- Added a new feature to automatically suspend BitLocker before upgrading the firmware. After the firmware upgrade is complete, BitLocker is automatically enabled.

Installation instructions

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Update in the section.
6. Click Flash from file to browse the USB drive to locate the downloaded file.
7. Select the file and click Submit.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Update BIOS.
10. Review the Warning message and click Confirm Update BIOS! to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell G5 5090 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to