Download Files
File Format: Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
File Name: Power_Firmware_J2P9G_WN64_01.12.0A_01.EXE
File size: 7.69 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 73b8be4c22d26027c68d43286d901c02
SHA1: 62a7932e8819a6f27ba7cc118e80ca33b67861b6
SHA-256: 751544a40df27c7e950bcc0afdec29671d38b12013ae18eeaaa93f8be1ac2672
File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
File Name: Power_Firmware_J2P9G_LN_01.12.0A_01.BIN.sign
File size: 226 Bytes
To ensure the integrity of your download, please verify the checksum value.
MD5: 0fd11825a18e129b6073d19796639456
SHA1: 8810d80fd2cf619c63fac99f1a91901f1894d98a
SHA-256: 0e2ab0bc09b913a412cedf60840ce974aa17488abea4268a832dc88b8c2cbeb9
File Format: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
File Name: Power_Firmware_J2P9G_WN32_01.12.0A_01.EXE
File size: 6.72 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: afbbca28081553e736ae67d5140522b7
SHA1: b6589225fde5e3ab5f58b8036e8b45807fb4a87d
SHA-256: c817c97224aec87dbb99d05c59b331a202c79d8741a170c5a39f251366b98a17
File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
File Name: Power_Firmware_J2P9G_LN_01.12.0A_01.BIN
File size: 2.11 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: b736d6024ae6b765b2ea2119f964ebc7
SHA1: da271f6f951f7330f761f2047e1c75cb9c65c88e
SHA-256: d47ef0d2be952cc6ed782e972a281501dd673a270d09c3345d65bb882597adba
Fixes & Enhancements
Fixes:
- N/A
Enhancements:
- Enable PSU Ein reporting at standby mode.
- Improve CLEAR_FAULT function problem during holdup time.
- Adding Vsb soft-start function.
Important Information
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
Please be noticed this DUP can ONLY apply the secondary side firmware on the target PSU since design limitation.
Supported Operating Systems
Installation instructions
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Applies to
Delta 750W HVDC PSU(PN: CWKMX)