Firmware for Dell Metered and Managed rPDUs with LED displays

You need to know the IP address of the rPDU as well as the userid and password before you begin the update process.

Download the zip file (JN3GC_Dell_LED_rPDU_firmware.zip)and unpack the contents to a folder. Open the folder the execute dell_hw05_aos514_rpdud513a_bootmon102.exe. The exe provides you the option of automatically starting the firmware upgrade session or doing it manually. If you want to start the session automatically check the box "When done unzipping open \FW_Upgrade_R2.exe" and leave unchecked if you want to start the sessions manually at a later time. To start the session manually run FW_Upgrade_R2.exe.

You need to know the IP address of the rPDU as well as the userid and password. Once you have entered those three parameters in the tool hit the PING radio button. If PING comes back as successful then hit the Upgrade Now radio button. The upgrade program will load the boot monitor, the operating system, and the application firmware files. The tool has a log and will diplay whether the upgrade was sucessful or not.

If you need the MIB it is part of the ZIP package and will be oneof the files (Dell_rPDU.mib) when you unzip JN3GC_Dell_LED_rPDU_firmware.zip

Reboot will be required