Dell Alienware 18 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : VKP80

Importance : Critical

Version : A13, A13 Latest version Recommended version Latest and Recommended version

Release Date : 23 Feb 2018

Download Type : System BIOS

Category : BIOS

Dell Alienware 18 System BIOS update compatible with Windows and DOS.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: VAS10A13.exe

File size: 10.79 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 67a194ef7a26fc75616a34400f29972b

SHA1: 3f77e71692fd54d2f3106b45c69bcbd19cc175a8

SHA-256: 7d93cec557d51ea8c6fb0ab215821c3cfff1af640abdc68a6e60e50390a372f8

Download .EXE

Installation instructions

[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.

[Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Go to "Exit > Exit Save Changes" and reboot system.

Dell Alienware 18 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to