Download Files
File Format: This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
File Name: T30_BIOS 1.0.14_RN.pdf
File size: 206.2 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: cd2396a66358f35c9b2cd971e93a733a
SHA1: a35e35b87c212bbeda63dcace5610d9ef5b3a3de
SHA-256: 8dcca57fc6650a1e106cc54a57d90fd3f14627003203ef037790d0eaaa345914
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: PowerEdge_T30_1.0.14.exe
File size: 8.48 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 5221051fa86a39d66e28a00aa75ce0d7
SHA1: 1ade952c8db40a9217371aaa88683b7f2935b942
SHA-256: 9b0571a7ee96a8df3d3d2e938b68989f9b8b4d0f1fc72065f65681a0ffc6deb8
Fixes & Enhancements
Fixes
- Updated Intel ME Firmware to address security advisories INTEL-SA-00112 (CVE-2018-3628 CVE-2018-3629 CVE-2018-3632 ) & INTEL-SA-00118(CVE-2018-3627)
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 & CVE-2018-3640)
Enhancements:
- A new Embedded Server RAID Technology (ESRT) GUID is created for the T30 servers.
Important Information
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.