Download Files
File Name: OS_ISO_9.1.4097.zip
File size: 702.83 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: ef4901a50543d569321a222cc10cf715
SHA1: 3a4efe9ae0ca06c5e804c964abfea4d585c3ec0f
SHA-256: 103bbcb53616983878d5d7c81fb4822914185703997fa6807e81432a30f512fa
Fixes & Enhancements
- Citrix update
Added the HTTP proxy support for anonymous authentication in Zoom optimization.
- Horizon Blast updates
Supports Bloomberg keyboard STB 100 connection through single or dual USB cables and no setting changes or redirection required.
Supports default optimization of Microsoft Teams media.
- WVD update
Supports printer.
- Zoom optimization update
Added HTTP proxy support for anonymous authentication.
- ThinOS local update
Enabled IPv6 by default for wired and wireless networks.
Important Information
- Do not power off your thin client until the installation is complete.
- You cannot boot into ThinOS 9.1.4097 when you perform any of the following operations in BIOS setup:
Disable the on-board Network Interface Card (NIC), Trusted Platform Module (TPM), or Platform Trust Technology (PTT).
Clear TPM or PTT.
Reset BIOS to factory default settings.
- WiFi 6/6E and Imprivata are not supported in this release.
For more information, see the latest Dell Wyse ThinOS 9.1.4097 Release Notes at www.dell.com/support.
Supported Operating Systems
Installation instructions
Please follow below steps to install ThinOS 9.1.4097 recovery image
1. Download and install Dell OS Recovery Tool on Windows from https://www.dell.com/support/osrecovery.
2. Download and extract OS_ISO_9.1.4097.zip at www.dell.com/support.
3. Plugin a USB disk to Windows, and open Dell OS Recovery Tool.
4. Click "SWTICH TO ADVANCED RECOVERY".
5. Browse the DTOS_9.1.4097.iso file and click "NEXT" (Do not select any other option).
6. Select the USB disk and click "BURN OS" to create the recovery USB disk.
7. Power on OptiPlex 3000 Thin Client with the USB disk and Press F12.
8. Select the USB disk in the boot device list (Make sure you have enabled USB boot support in BIOS setup).
9. On the install window select the OS image and the application packages that you want to install, and press Enter.
10. Wait till all files copied to OptiPlex 3000 Thin Client and client will auto power off.
11. Power on OptiPlex 3000 Thin Client, will continue the installation process.