Firmware for the Nvidia HGX H100 80G 8-GPU Baseboard Assembly - Non-Rollback Protected

Important Information
===================
- IMPORTANT: The system must be Powered ON for the firmware update to be applied.
- An AC REBOOT or Virtual AC Power Cycle/Full Power Cycle is required after completion for the firmware changes to take effect.

Installation Instructions
=========================
Installation via iDRAC.
1. Download the file to a system with access to the IDRAC of the server you wish to update.
2. Log into the iDRAC of the server you wish to update.
3. Navigate to the System Update menu.
4. Click the Browse button and navigate to the downloaded file and select.
5. Click the check box next to the package at the bottom of the IDRAC menu.
6. Click the Update button in the iDRAC menu.
7. Wait for the created Job to finish.
8. AC Reboot or Virtual AC Power Cycle/Full Power Cycle the system.

Virtual AC Cycle can be invoked by setting the System BIOS > Miscellaneous Settings > Full Power Cycle option. This can also be configured through Dell iDRAC.
https://infohub.delltechnologies.com/en-us/p/idrac9-virtual-power-cycle-remotely-power-cycle-dell-emc-poweredge-servers/

Physical AC Cycle requires that all AC power is removed from the server node.
https://www.dell.com/support/kbdoc/en-us/000175625/how-do-i-reset-and-drain-power-of-my-dell-poweredge-server