Intel SSD SATA SSDSC2BA100G3T, SSDSC2BA200G3T, SSDSC2BA400G3T and SSDSC2BA800G3T firmware version DL06
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version DL06 for Intel SSD (SSD 2.5 SATA) 100GB, 200GB, 400GB and 800GB Hard Drives. Dell. Vendor model numbers INTEL SSDSC2BA100G3T, INTEL SSDSC2BA200G3T, INTEL SSDSC2BA400G3T and INTEL SSDSC2BA800G3T.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
Added SCT command (0xC002) to read custom PHY settings
Drive will automatically RESET after 500ms if power-off time is less than 500ms specification to allow proper drive enumeration after power-on
Sanitize Crypto Scramble EXT command allowed in Disable Logical state, which will generate a new AES key and secure the drive
Enhancements:
Drive supports 512B and 4KB physical sector size
As grown defects increase, SMART E8h value will decrease linearly
After power cycle, the Timed Workload counters will resume from the last saved values and update after 60 minutes and every minute thereafter
Read MoreAdded SCT command (0xC002) to read custom PHY settings
Drive will automatically RESET after 500ms if power-off time is less than 500ms specification to allow proper drive enumeration after power-on
Sanitize Crypto Scramble EXT command allowed in Disable Logical state, which will generate a new AES key and secure the drive
Enhancements:
Drive supports 512B and 4KB physical sector size
As grown defects increase, SMART E8h value will decrease linearly
After power cycle, the Timed Workload counters will resume from the last saved values and update after 60 minutes and every minute thereafter
Version
DL06, A00
Release date
30 Jan 2015
Download Type
Firmware
Category
Storage
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: Serial-ATA_Firmware_51TWP_WN64_DL06_A00.EXE
File Size: 18.78 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
fb9b7ed3fbc8fa475f54f5a9325db746
SHA1:
82f7d3566c46a2925298ea8fea7a54e8fced6eba
SHA-256:
5a9abe75a2aabc9acf990f98d05f0dc039f31a79060fb666528c9f8840a8ad06
File Format: Update Package for MS Windows 32-Bit
File Name: Serial-ATA_Firmware_51TWP_WN32_DL06_A00.EXE
File Size: 11.66 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
de61e41458160218a37faee6f59c3076
SHA1:
7839356a1155f24c5a3bab7327ff180b5a35c154
SHA-256:
e8e11e461aa5b1d58ff6772ac0c6c39955153607486341b995ca5a50d0b0f7a1
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Windows Server 2012
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Applies to
Intel SSD DC S3700 100GB SATA
Intel SSD DC S3700 200GB SATA
Intel SSD DC S3700 400GB SATA
Intel SSD DC S3700 800GB SATA
Installation instructions
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.