Nautilus update package for LiteOn SATA SSD firmware 11E4 for model number(s) EBE-120NAS and ECE-120NAS; firmware 11S4 for model number(s) EBT-480N9S, EBT-960N9S ECT-480N9S, ECT-960N9S, ECT-1920N9S; firmware 11Y4 for model number(s) EBE-100NAS, EBE-200NAS, EBE-400NAS, ECE-100NAS, ECE-200NAS, ECE-400NAS, ECE-800NAS; firmware 11Z4 for model number(s) EBT-60N9S, EBT-120N9S, ECT-60N9S, ECT-120N9S.

This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

Download

1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Click Continue to extract it and select a location.
3. Go to the directory where the files where extracted and open the Nautilus folder.
4. Click on 'UsbMake.exe' and either install to a USB drive or create an ISO.
5. Make sure the system boot mode is set to UEFI and boot to the ISO or the USB key.
6. Follow the prompts to install the firmware.

Reboot will be required