Dell PowerVault 132T Tape Library, v.LTO3, A07
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Firmware for the PowerVault 132T Library; LTO1, LTO2, LTO3, and SDLT320 Tape Drives; Remote Management Unit; and SNC Module.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
PowerVault 132T Tape Library Firmware Release Notes
This release contains the following firmware versions:
*PowerVault 132T LTO Library Firmware: 308D.GY002
*PowerVault 132T SDLT Library Firmware: 227D.GZ002
*PowerVault 132T Remote Management Card Firmware: 193F.00002
*PowerVault 132T LTO1 Tape Drive Firmware: 36U3
*PowerVault 132T LTO2 Tape Drive Firmware: 53Y3
*PowerVault 132T LTO3 Tape Drive Firmware: 54K1
*PowerVault 132T SDLT320 Tape Drive Firmware: 5252 (V82)
*PowerVault 132T SNC Module Firmware: 4.50.03
---
PowerVault 132T LTO Library Firmware 308D.GY002
Previous version: 227D.GY002
* Added support for LTO3 tape drives.
* Options for native-FC LTO3 drives added to menus
* Added remote reboot capability through RMU with RMU version 193F.00002
- Remote reboot currently available for LTO libraries only
---
PowerVault 132T SDLT Tape Library Firmware: 227D.GZ002
Previous version: 227D.GZ002
* The firmware did not change from the previous release.
- Remote reboot capability is not supported on SDLT libraries at this time
---
PowerVault 132T Remote Management Card 193F.00002
Previous version: 181F.00003
* Added remote rebooting of the library with LTO library version 308D.GY002 (not available on SDLT libraries at this time)
* Added support for LTO3 drives
* Resolved remote Control Panel incompatibility with Windows XP SP2
---
PowerVault 132T LTO1 Drive Firmware: 36U3
Previous version: 36U3
* The firmware did not change from the previous release.
---
PowerVault 132T LTO2 Drive Firmware: 53Y3
Previous version: 53Y3
* The firmware did not change from the previous release.
---
PowerVault 132T LTO3 Drive Firmware: 54K1
Previous version: n/a
* Initial release.
---
PowerVault 132T SDLT320 Drive Firmware: 5252 (V82)
Previous version: 5252 (V82)
* The firmware did not change from the previous release.
---
PowerVault 132T Fibre Channel Module Firmware: 4.50.03
Previous version: 4.45.04
* Added Command Flow Logging
* Added support for LTO3 drives
Read MoreThis release contains the following firmware versions:
*PowerVault 132T LTO Library Firmware: 308D.GY002
*PowerVault 132T SDLT Library Firmware: 227D.GZ002
*PowerVault 132T Remote Management Card Firmware: 193F.00002
*PowerVault 132T LTO1 Tape Drive Firmware: 36U3
*PowerVault 132T LTO2 Tape Drive Firmware: 53Y3
*PowerVault 132T LTO3 Tape Drive Firmware: 54K1
*PowerVault 132T SDLT320 Tape Drive Firmware: 5252 (V82)
*PowerVault 132T SNC Module Firmware: 4.50.03
---
PowerVault 132T LTO Library Firmware 308D.GY002
Previous version: 227D.GY002
* Added support for LTO3 tape drives.
* Options for native-FC LTO3 drives added to menus
* Added remote reboot capability through RMU with RMU version 193F.00002
- Remote reboot currently available for LTO libraries only
---
PowerVault 132T SDLT Tape Library Firmware: 227D.GZ002
Previous version: 227D.GZ002
* The firmware did not change from the previous release.
- Remote reboot capability is not supported on SDLT libraries at this time
---
PowerVault 132T Remote Management Card 193F.00002
Previous version: 181F.00003
* Added remote rebooting of the library with LTO library version 308D.GY002 (not available on SDLT libraries at this time)
* Added support for LTO3 drives
* Resolved remote Control Panel incompatibility with Windows XP SP2
---
PowerVault 132T LTO1 Drive Firmware: 36U3
Previous version: 36U3
* The firmware did not change from the previous release.
---
PowerVault 132T LTO2 Drive Firmware: 53Y3
Previous version: 53Y3
* The firmware did not change from the previous release.
---
PowerVault 132T LTO3 Drive Firmware: 54K1
Previous version: n/a
* Initial release.
---
PowerVault 132T SDLT320 Drive Firmware: 5252 (V82)
Previous version: 5252 (V82)
* The firmware did not change from the previous release.
---
PowerVault 132T Fibre Channel Module Firmware: 4.50.03
Previous version: 4.45.04
* Added Command Flow Logging
* Added support for LTO3 drives
Version
LTO3, A07
Release date
18 Aug 2005
Download Type
Firmware
Category
Tape Automation
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: ZipPack External
File Name: R105969.EXE
File Size: 14.26 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Please view the installation instructions included with this firmware release for important information. This firmware update must be run on a computer system that is attached to the PowerVault 132T. The utilities included with this package only run in Windows operating systems. It is important that you power cycle the PowerVault 132T tape library and all systems connected to it once the firmware update has completed.
Supported Operating Systems
Red Hat® Ent Linux 2.1
Red Hat® Ent Linux 3
Red Hat® Ent Linux 4
Red Hat® Linux 6.1
Red Hat® Linux 6.2
Red Hat® Linux 7.0
Red Hat® Linux 7.1
Red Hat® Linux 7.2
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Powered
Windows Server 2003 x64
Applies to
BASE,LDT,PV132,4U,1DR,S,LTO2,X
BASE,LDT,PV132,4U,1DR,S,LTO3,X
BASE,LDT,PV132,4U,1DR,SDLT,X
BASE,LDT,PV132,4U,2DR,S,LTO2,X
BASE,LDT,PV132,4U,2DR,S,LTO3,X
BASE,LDT,PV132,4U,2DR,SDLT,X
BASE,RACK,P132,4U,1D,FC,LTO3,X
BASE,RACK,P132,4U,2D,FC,LTO3,X
BASE,RACK,PV132,4U,1D,FC,LT2,X
BASE,RACK,PV132,4U,1D,S,LTO2,X
BASE,RACK,PV132,4U,1D,S,LTO3,X
BASE,RACK,PV132,4U,1DR,SDLT,X
BASE,RACK,PV132,4U,2D,S,LTO2,X
BASE,RACK,PV132,4U,2D,S,LTO3,X
BASE,RACK,PV132,4U,2DR,SDLT,X
KIT,BRKT,PV132T,V2,RHOS
KIT,DOC,TB,1DR,S,PV132T,ROHS
KIT,DOC,TB,CBL,2DR,S,ROHS
KIT,DOC,TB,CBL,FC,PV132T,ROHS
KIT,TB,9.6TB,CHAS,LDT,ROHS
KIT,TB,9.6TB,CHAS,RACK,ROHS
KIT,TB,LDT,4U,1DR,S,LTO3,ROHS
KIT,TB,LDT,4U,2DR,S,LTO3,ROHS
KIT,TB,RACK,4U,1DR,FC,LTO3,RHS
KIT,TB,RACK,4U,1DR,S,LTO3,ROHS
KIT,TB,RACK,4U,2DR,FC,LTO3,RHS
KIT,TB,RACK,4U,2DR,S,LTO3,ROHS
PowerVault 132T Tape Library
Installation instructions
Custom Instructions for R105969.EXE:
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R105969.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R105969.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R105969 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R105969.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R105969.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R105969 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.