Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 3440A04.EXE
File size: 5.62 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: d6696b2ab8e5f9d0878b73449ad76382
SHA1: eee8cb2490e5e07ff1257a314a9dc37c5b14af99
SHA-256: cd00c5d73bb6f0028c954006e1e9cb56cee42c4816395b51d87b28ee8051012c
Fixes & Enhancements
Fixes
-Not Applicable
Enhancements
- Enhance User hard drive use experience
Important Information
Note. Due to BIOS X11 adds Rapid Start module, NVRAM update is required.
1. If BIOS version is X10 (or previous version), please update BIOS to X11 first. Beside, BIOS variable will be erased after update BIOS X11.
Update path should be: X10 (or previous)> X11 > A00 or A01.
2. If want to rollback BIOS X11 (or later) back to X10 (or previous version), please execute BIOS.bat to flash entire SPI ROM. (Otherwise, system will crash.)
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears,click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please makesure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required