Dell Inspiron 3650/3250 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : HG12F

Importance : Critical

Version : 3.11.1, 3.11.1 Latest version Recommended version Latest and Recommended version

Release Date : 12 Jun 2020

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00295, INTEL-SA-00320, INTEL-SA-00329, INTEL-SA-00289, INTEL-SA-00317, INTEL-SA-00219, INTEL-SA-00270, INTEL-SA-00241, INTEL-SA-00260, and INTEL-SA-00254. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Inspiron_3650_3250_Vostro_3650_3653_3250_3.11.1.exe

File size: 7.23 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 11814dec897456f80ac8449cafaa31cc

SHA1: c737fb5dcca70c5a876483532c16bb225f791bdb

SHA-256: ef14c3a1f6f52b829ebd9a4116f977ab3c71915049174150a1ed643032d10a03

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 6 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 54882aef1fd577c9715501b083ac98a3

SHA1: 04d0752e6444653075193cfc9040fc69e3dc9f22

SHA-256: 9991bad7d543a7a7bed356625fe61757d7c8204f551a1a509cebf5bd5a6f4bc8

Download .RCV

Fixes & Enhancements

- Firmware updates to address the Intel Security Advisory INTEL-SA-00295 (CVE-2020-0536, CVE-2020-0539, and CVE-2020-0545).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00320 (CVE-2020-0543).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00329 (CVE-2020-0548 and CVE-2020-0549).
- Firmware updates to address the Intel Security Advisories INTEL-SA-00289 (CVE-2019-11157) and INTEL-SA-00317 (CVE-2019-14607).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00241 (CVE-2019-0169, CVE-2019-11104, CVE-2019-11090, CVE-2019-0168, CVE-2019-11087, CVE-2019-11101, CVE-2019-11106, and CVE-2019-11147).
- Firmware updates to address Intel Security Advisories INTEL-SA-00219 (CVE-2019-0117), INTEL-SA-00220 (CVE-2019-0123), and INTEL-SA-00270 (CVE-2019-11135).
- Firmware updates to address Intel Security Advisories INTEL-SA-00260 (CVE-2019-0154) and INTEL-SA-00254 (CVE-2019-0185).
- Fixed the issue where some security settings in the BIOS setup are set to the default value. This issue occurs when the RTC reset is performed when there is an admin password.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS (Non-Windows users)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Inspiron_3650_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Inspiron_3650_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.

Dell Inspiron 3650/3250 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to