Dell Patches And Fixes (Desktop), A00

To use this application from the diskette file, follow the steps below:

1) Insert the disk in your floppy drive and type "A:\install.exe" from
Start-->Run.

2) Allow all activity to stop, remove the floppy disk when prompted, and
re-start your system by using Start -> Shutdown-> Restart.

3)When the system boots up to Windows 98, you should see a window in the
top right corner that shows a text message “Now completing installations
of applications”. It is strongly recommended that you do not open up any
applications while setup is running. This will automatically run through
a number of reboots, and will take some time depending on what was ordered
on the system.

4) Installation will be complete when the system reboots for the last time
and the “Now completing installations of applications” does not show up in
the upper right hand corner of the desktop.

5) To use this application from the self-extracting file, follow the steps
below:


OR

If using the self-extracting zip file, unzip the files:

1) Double click on the file to begin the install process, or begin the
install by using Start--> Run and type c:\dell\drivers\kmxfx\install.exe
to run it from the c:\Dell directory.
**If you have chosen a different directory rather then the default Dell
directory, replace Dell with the directory you chose in the example
command line above.

2) Restart your system by selecting Start -> Shutdown-> Restart.

3) When the system boots up to Windows 98, you should see a window in the
top right corner that shows a text message “Now completing installations
of applications”. It is strongly recommended that you do not open up any
applications while setup is running. This will automatically run through
a number of reboots, and will take some time depending on what was ordered
on the system.

4) Installation will be complete when the system reboots for the last time
and the “Now completing installations of applications” does not show up in
the upper right hand corner.