Dell Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives

Restart required

Driver Id : VKN1J

Importance : Recommended

Version : A07, A07 Latest version Recommended version Latest and Recommended version

Release Date : 03 May 2013

Download Type : Utility

Category : SAS Drive

This is a general maintenance release utility for updating firmware for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.

This is for use on PowerEdge platforms that support UEFI boot mode for SAS and SATA drive updates. Please refer to DOS firmware update utility for older platforms. Current DOS release is A44.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: NautilusA07efi_ZPE.exe

File size: 31.23 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: f99db051e195d0879da19b3569d0d1e6

SHA1: 4addea19cb85df52c2d11a5c920fb9754e46280b

SHA-256: de8e10108ac983910d0a029b6c724d4f26a5ac941aa2e79edf09c9837068f7b6

Download .EXE

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: readme.txt

File size: 37.05 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: 2a3bb8a32f191836a1a21a6da7b39f70

SHA1: 5ae888e9e029e645e3934a3496b37297195700ad

SHA-256: dc7bdd91f16606d9edafa379f88a5ce53b6b16314c57bb93a8872ea6fe9a1555

Download .TXT

Fixes & Enhancements

See attached release notes for more details.

Updated Firmware Releases Since Last Release:

Western Digital 10k SAS 2.5", version D1VC, for drive model number WD3000BKHG-18A29 (300GB) and WD6000BKHG-18A29 (600GB).
Toshiba 7.2k SAS 3.5", version DCAD, for drive model nuumbers MK1001TRKB (1TB) and MK2001TRKB (2TB).
Western Digital 7.2K SAS 3.5", version D1BH for drive models WD1000FYYG (1TB) and WD2000FYY (2TB).
Hitachi 7.2k SAS 3.5", version M440, for drive model numbers HUS723020ALS640 (2TB) and HUS723030ALS640 (3TB)
Toshiba 15k SAS 2.5", version DB08, for drive model nuumbers MK1401GRRB (146GB) and MK3001GRRB (300GB).
Hitachi 10k SAS 2.5", version N440, for drive model numbers HUC109030CSS600 (300GB), HUC109060CSS600 (600GB) and HUC109090CSS600 (900GB).
Toshiba 10k SAS 2.5", version DE08, for drive model numbers AL13SEB300 (300GB), AL13SEB600 (600GB) and AL13SEB900 (900GB).
Hitachi 7.2k SAS 2.5", version U440, for drive model numbers HUC101212CSS600 (1.2TB).
Hitachi 10k SAS 3.5", version E760, for drive model numbers HUS156030VLS600 (300GB), HUS156045VLS600 (450GB) and HUS156060VLS600 (600GB).
Hitachi 10k SAS 2.5", version A440, for drive model numbersHUC106030CSS600 (300GB) and HUC106060CSS600 (600GB).

Installation instructions

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Reboot will be required

Dell Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to