LSI 9460-16i Firmware
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the LSI 9460-16i Firmware update.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Added support for NVMe passthrough in UEFI mode.
- Added support for mixed mode. Mixed mode allows you to use SAS/SATA drives, and NVMe drives simultaneously.
Read More- Added support for mixed mode. Mixed mode allows you to use SAS/SATA drives, and NVMe drives simultaneously.
Version
50.8.0-2029, A05
Release date
21 Oct 2019
Download Type
Firmware
Category
SAS RAID
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: ZipPack External
File Name: 9460_FW_MR7.8.1_ZPE.exe
File Size: 7.64 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
4b91d0fe50a5a9ddeb5fcad8b7729efb
SHA1:
af09c8c0f4434dcd15b5ba88ee0d4572362cbafe
SHA-256:
fe770761610e5acd32099686dc35b25ccb2870b966b293d5340647c727873f05
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Not Applicable
Applies to
9460-16i Storage Controller for Precision Workstations
MegaRAID SAS 9460-16i
Installation instructions
Download and Extract
1. Click Download to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Extract the file from the .zip.
4. Follow the instructions in the Readme.txt within the .zip file.
Installation
UEFI
1. Run the storcli.efi from the UEFI shell.
2. To update, use the following command in the UEFI shell and reboot the system after completion:
storcli.efi /c0 download file = 9460-16i_nopad.rom
3. Repeat the step if you have more than one controller in your system by updating /c0 to /c1, and so on.
Windows 32-bit and 64-bit
1. Open an elevated command prompt window by using the Run as administrator option.
2. For 32-bit systems, run the storcli.exe and for 64-bit systems, run storcli64.exe.
3. To update, run the following command and reboot the system after completion:
For Windows 32-bit - storcli.exe /c0 download file = 9460-16i_nopad.rom
For Windows 64-bit - storcli64.exe /c0 download file = 9460-16i_nopad.rom
4. Repeat the step if you have more than one controller in your system by updating /c0 to /c1, /c2, and so on.
Enabling the NVMe profile
Note: ProfileID=11 is used only NVMe and ProfileID=13 is used for Mixed mode to use SAS/SATA and NVMe simultaneously.
UEFI
1. Run the following command to change the card to NVMe profile:
storcli.efi /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli.efi /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli.efi /c0 show profile
Windows 32-bit
1. Run the following command to change the card to NVMe profile:
storcli.exe /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli.exe /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli.exe /c0 show profile
Windows 64-bit
1. Run the following command to change the card to NVMe profile:
storcli64.exe /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli64.exe /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli64.exe /c0 show profile
1. Click Download to download the file.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
3. Extract the file from the .zip.
4. Follow the instructions in the Readme.txt within the .zip file.
Installation
UEFI
1. Run the storcli.efi from the UEFI shell.
2. To update, use the following command in the UEFI shell and reboot the system after completion:
storcli.efi /c0 download file = 9460-16i_nopad.rom
3. Repeat the step if you have more than one controller in your system by updating /c0 to /c1, and so on.
Windows 32-bit and 64-bit
1. Open an elevated command prompt window by using the Run as administrator option.
2. For 32-bit systems, run the storcli.exe and for 64-bit systems, run storcli64.exe.
3. To update, run the following command and reboot the system after completion:
For Windows 32-bit - storcli.exe /c0 download file = 9460-16i_nopad.rom
For Windows 64-bit - storcli64.exe /c0 download file = 9460-16i_nopad.rom
4. Repeat the step if you have more than one controller in your system by updating /c0 to /c1, /c2, and so on.
Enabling the NVMe profile
Note: ProfileID=11 is used only NVMe and ProfileID=13 is used for Mixed mode to use SAS/SATA and NVMe simultaneously.
UEFI
1. Run the following command to change the card to NVMe profile:
storcli.efi /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli.efi /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli.efi /c0 show profile
Windows 32-bit
1. Run the following command to change the card to NVMe profile:
storcli.exe /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli.exe /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli.exe /c0 show profile
Windows 64-bit
1. Run the following command to change the card to NVMe profile:
storcli64.exe /c0 set ProfileID=11
2. Run the following command to change the card back to SAS/SATA profile:
storcli64.exe /c0 set ProfileID=10
3. Run the following command to check the profile:
storcli64.exe /c0 show profile
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.