Dell Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives

Restart required

hi testing

Driver Id : 05R73

Importance : Recommended

Version : A10, A10 Latest version Recommended version Latest and Recommended version

Release Date : 11 Sep 2013

Download Type : Utility

Category : SAS Drive

This is a general maintenance release utility for updating firmware for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.

This is for use on PowerEdge platforms that support UEFI boot mode for SAS and SATA drive updates. Please refer to DOS firmware update utility for older platforms. Current DOS release is A47.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: NautilusefiA10_ZPE.exe

File size: 78.88 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 293a85bc50c6820d159c807c95724624

SHA1: 5dbf03e8da86ae5f0e068fd4fb7660d04596a61c

SHA-256: 010411f902bb1d5d721497d5d8c016e0edca1342df61d704f8ae24a967f73cd7

Download .EXE

Fixes & Enhancements

This release contains firmware version A008 for Toshiba SAS SSD(2.5 SAS SSD) 100GB, 200GB and 400GB Hard Drives. Dell. Vendor model numbers MK1001GRZB, MK2001GRZB and MK4001GRZB.

This release will update Western Digital SAS 3.5 7.2k, to version D1R5 for drive models WD1001FYYG, WD2001FYYG, WD3001FYYG and WD4001FYYG.

This release contains firmware version DG02 for Toshiba SAS 1TB, 2TB, 3TB and 4TB Hard Drives. Dell. Vendor model numbers MG03SCA100, MG03SCA200, MG03SCA300, and MG03SCA400.

This release contains firmware version YS0A for Seagate SAS (15K rpm 2.5 SAS) 146GB and 300GB Hard Drives. Dell. Vendor model numbers ST9300653SS and ST9146853SS.

This release contains firmware version YSFA for Seagate SAS (7.2K rpm 2.5 SAS) 300GB Hard rive. Dell. Vendor model number ST9300453SS.

Installation instructions

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Reboot will be required

Dell Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to