Artesyn 1400W RAF PSU (PN: 8WKTV) Firmware Package

Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the new firmware for power supplier and is supported on Artesyn 1400W RAF PSU (PN: 8WKTV) running on the Windows and Linux operating systems.
Use iDRAC version 6.10.89.00 or higher to install this firmware.
Recommended

Check compatibility

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Fixes:
Corrects the Fan Behavior

Enhancements:
None
Read More

Version

00.2C.2E, A00

Release date

12 Dec 2024

Download Type

Firmware

Category

Power

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: Power_Firmware_0GGMG_WN64_00.2C.2E_A00.EXE
File Size: 8.25 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
5fac1bbee6e768273fc347c7b295d181
SHA1:
7496a99ac3f0b021d0e7596d01ba2584b74c774a
SHA-256:
b152e0a8422c240461b31e15d77f243ad30fc53a811488d70c4992a0ad491e18
File Format: A GnuPG file which contains a cryptographic signature
File Name: Power_Firmware_0GGMG_LN64_00.2C.2E_A00.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
58e8051f8da0420358c0b432bfb79ea9
SHA1:
369287254ff101bb7851fcd6ed9dd3a82140e7c5
SHA-256:
6b313b35bfdc805b7f1bed76c0c05882111ccaca22bdfb3cfc12c5f199f2497f

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
IMPORTANT:
- After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically

CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
1400W 60mm Reverse Air Flow PSU - Artesyn, V1
PSU FIRMWARE UPDATE INSTRUCTIONS:

CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.

IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.

Drivers help and tutorials