Mellanox ConnectX-4 Lx Ethernet Adapter Firmware

Fixes:
- Fixed an issue that caused iDRAC IP to go down after changing from dedicated to shared LOM model
- Fixed an issue that caused the DUP to fail when querying a ConnectX-6 device with channel FW on Windows OS

Enhancements:
- VSC security includes the mechanisms which will prevent a reasonable host from affecting other hosts from using VSC.
- Zero touch RoCE enables RoCE to operate on fabrics where no PFC nor ECN are configured. This makes RoCE configuration a breeze while still maintaining its superior high performance.
- Added support for send opcode operations targeting a SRQ/RMP with the receive WQEs using ODP memory. In case the receive WQE receives an ODP, the device will generate ODP notifications (EQE) and PFAULT will abort CQEs.
Note: It is recommended to prefetch the memory used by the receive WQEs to reduce ODP occurrence as these have significant latencies and will cause a performance degradation.
- Firmware Burning using DMA Pages - capability accelerates the firmware burning process by using Direct Memory Access (DMA) pages.
- Auto-Sensing when using 25/10GbE Optical Modules - capability accelerates the network to auto-sense the port speed and use it when using a 25/10GbE optical module. Meaning, if the used module is 25GbE but the port is a 10GbE port, the speed used for that network will be 10GbE.
- Enabled Package ID configuration using server strap according OCP 3.0.
- DPDK UIO - capability provides a solution for improving user space drivers development, generic user space IO device services.
- Renamed the BOOT_RETRY_CNT1 parameter to BOOT_RETRY_CNT in mlxconfig

Windows Update Package:

Download
1. Click the "Download Now" link to download the file
Network_Firmware_0XN9N_WN64_14.25.80.00.EXE
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:

Download
1. Click the Download Now link to download the file Network_Firmware_0XN9N_LN_14.25.80.00.BIN
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the ./Network_Firmware_0XN9N_LN_14.25.80.00.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Network_Firmware_0XN9N_LN_14.25.80.00.BIN from the shell.
4. Follow the remaining prompts to perform the update.