Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: LCx-xxxL9S_ZPE.exe
File size: 2.39 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 13c8ebfb5bf30e18cfb1f165b26e4ec4
SHA1: 05d526344dee10a88176569366644c67794fc812
SHA-256: 1426bb2dfa306dab166a5461dddd2af3d1065e9c868932617a6aaced267efd95
Important Information
It is recommended that you back up your data and switch to AC power after doing so. Use the SSD, whose firmware has to be updated, as a backup or an external storage device drive using the USB port. The new firmware can be activated only after restarting the system or a power reset.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Installation instructions
Firmware upgrade through the Windows utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Download
1. Click Download File to download the file.
2. When the download is complete, unzip the file.
The file explorer open pointing to the directory that contains the downloaded file.
Upgrade Procedure
1. Close all applications and save your work before the firmware upgrade process.
2. Go to the location where you have downloaded the package and double-click the file to start the upgrade process.
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.