Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files.
File Name: V262-2020-07-09-External.zip
File size: 359.41 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: 1fcb731103e54148879fac668025cc83
SHA1: d451146593fcce0dbcb534b485b5b6c7d3e6689f
SHA-256: 9b1530040eb7375ebf905ce7e288314dca6c26871820890728cbf0b200498355
File Format: This file format contains plain text which can be viewed with a standard text editor.
File Name: PEC6400_CM_v2_62_ReleaseNotes_A00.txt
File size: 6.48 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: 8f5e75001a165ea76c3af0662d481c0c
SHA1: 4c372257904a6a2eaafc8e723808786746bfaf5c
SHA-256: 9d36ea298b7678f83910ad389b5832200bb820063892d1e870b1052aa5e60f3a
Supported Operating Systems
Installation instructions
Please refer to PEC6400_CM_ReleaseNotes_A00.txt
Updating CM firmware
---------------------------------
You can update the CM firmware through iDRAC by using the RACADM utility.
You can use local RACADM, remote RACADM, or firmware RACADM.
------------------------------------------------------------------------------------------
Updating CM firmware using local RACADM
------------------------------------------------------------------------------------------
Use the following command:
racadm update -f cm.sc
If the command is successful, the following messages is displayed:
Copying..
Transferring...
Applying Update.... Depending on the file size this operation might take several
minutes, do not interrupt the process.
RAC1066: Firmware update for cm.sc initiated successfully.
------------------------------------------------------------------------------------------
Updating CM firmware using remote RACADM
------------------------------------------------------------------------------------------
Use the following command:
racadm -r ip -u username -p password update -f cm.sc
If the command is successful, the following messages is displayed:
The Copying Operation has begun.
This might take several minutes to complete, depending on the network.
Do not interrupt the operation.
RAC1066: Firmware update for cm.sc initiated successfully.
------------------------------------------------------------------------------------------
Updating CM firmware from NFS network share using firmware RACADM
------------------------------------------------------------------------------------------
1. Log in to iDRAC CLI using putty/Teraterm
2. Use the following command:
racadm update -f -l 1.2.3.4:/share
If the command is successful, the following message is displayed:
.....Copying completed.
RAC1066: Firmware update for cm.sc initiated successfully.
------------------------------------------------------------------------------------------
CM firmware update may take up to 10 minutes.
CM reboots and initializes after firmware update is complete.
Use the following command to verify the CM firmware version.
The values are shown in hexadecimal format and need to be converted to decimal.
ipmitool -I lanplus -H -U username -P password raw 0x30 0x12
01 ff 1b 02 3e 01 00 00 00 03 02 00 01 2d 37 ff
ff 08 c2 00 00 00 08 01 08 10 64 23 fa 01
Byte 4 - Major version (02 hex) - 02
Byte 5 - Minor version (3e hex) - 62
For more information about the RACADM Update command, see the RACADM help by using the racadm help command
Applies to
PowerEdge C6400 Chassis Mgmt