Seagate ST34 for model number(s) ST600MM0069 and ST1200MM0099.
Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version ST34 for Seagate drives. Vendor model numbers ST600MM0069 and ST1200MM0099.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
-Fix the issue where unexpected Reservation Conflict status is reported after firmware download
-Fix the issue where drive stops responding to COMINIT after hard reset
-Fix the issue where command latency can be longer than expected
-Fix issues where assert condition can result
-Fix issues where drive hang condition can result
-Fix issues where command timeout can result
-Fix a log page format error
-Fix issues where SAS protocol violation can result
-Fix LED blinking to stop on failed Sanitize command
Enhancements:
-Improve throughput performance for specific workloads
-Improve recovery paths for various error situations
-Improve event logging/status reporting accuracy
Read More-Fix the issue where unexpected Reservation Conflict status is reported after firmware download
-Fix the issue where drive stops responding to COMINIT after hard reset
-Fix the issue where command latency can be longer than expected
-Fix issues where assert condition can result
-Fix issues where drive hang condition can result
-Fix issues where command timeout can result
-Fix a log page format error
-Fix issues where SAS protocol violation can result
-Fix LED blinking to stop on failed Sanitize command
Enhancements:
-Improve throughput performance for specific workloads
-Improve recovery paths for various error situations
-Improve event logging/status reporting accuracy
Version
ST34, A00
Release date
30 Sep 2020
Download Type
Firmware
Category
SAS Drive
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: SAS-Drive_Firmware_22YC9_WN64_ST34_A00.EXE
File Size: 10.75 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
3286dc7eaa0341035cae5526d4e948b3
SHA1:
fb8f29176be2983c65f83c657a879367832c6354
SHA-256:
9623bcbaafaa221374cc304eafad85dc99b7ea8c7e5626984b951b13a9bc945a
File Format: A GnuPG file which contains a cryptographic signature
File Name: SAS-Drive_Firmware_22YC9_LN_ST34_A00.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
bc7c04cf0227d509e44bc3e3f07e739d
SHA1:
8351dd11aab284a3e0e1728713392143ccbdeae4
SHA-256:
2734b0fabe70e7de071446011e2150be364c03e0f19d1ce1df49abf75bad8da5
File Format: Update Package for MS Windows 32-Bit
File Name: SAS-Drive_Firmware_22YC9_WN32_ST34_A00.EXE
File Size: 9.55 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
ee3775992da290eb582a251bc771ef48
SHA1:
537272d1c788c5415ee61f5eb447cba526ae1fb3
SHA-256:
288ed89cacbc7c6167551a863aa59b1e7830654adaff8654967a420c63e6df16
File Format: Update Package for Red Hat Linux
File Name: SAS-Drive_Firmware_22YC9_LN_ST34_A00.BIN
File Size: 6.45 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c753a86c7a118d482b712b406ef4b9e7
SHA1:
88bef9a34e87e9f22fb6d0b2745d09a714e05987
SHA-256:
b1979f7342535083f200d65f9b00a96ce1c3884d9d1bd73646927e04555b7512
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Red Hat® Linux 6.1
Red Hat® Linux 6.2
Red Hat® Linux 7.0
Red Hat® Linux 7.1
Red Hat® Linux 7.2
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Windows Server 2012
Not Applicable
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Windows Storage Server 2012 R2
SUSE Linux ES 12
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2019 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Applies to
Seagate Skybolt 1.2TB HDD 12Gbps SAS 2.5 10K 512n ISE
Model Number: ST1200MM0099
Regulatory Model Number: STT003
Vendor PN: 1XH230-150
Seagate Skybolt 600GB HDD 12Gbps SAS 2.5 10K 512n ISE
Model Number: ST600MM0069
Regulatory Model Number: STT003
Vendor PN: 1XF230-150
Installation instructions
1. Click the 'Download Now' link to download the file.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.