Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: XPS_One_2710_A14.EXE
File size: 12.38 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 571a031fcbccb8acdd8c2ab8b3104a42
SHA1: eec7fe9e204d6221f83b8430e4598067503b5d13
SHA-256: a9b125f2fcbe082e05bdb50ad7823bd7630ea6050dc38595587a5c583350cb8e
Fixes & Enhancements
Fixes:
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 & CVE-2018-3640).
Enhancements:
- Not Applicable.
Important Information
Please run A14.exe directly if you already updated the BIOS to A06, A08, A09, A10, A11, A12 or A13.
Attention! Once you upgraded the BIOS to A14. Please DO NOT downgrade the BIOS to any older version.
Note! The SATA mode will be changed to AHCI after you flash the BIOS if your system BIOS is A08 or older.
This BIOS will automatically detect SATA configuration and set to the correct mode accordingly when you click loading defaults as this --- BIOS Setup > Exit > Load Defaults;
Please DO RUN 'Load Defaults' after you update BIOS.
Be careful: That BIOS settings will be load to defaults except 'Boot Mode', 'Secure Boot Control' and 'Load Legacy OPROM'.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Press "Yes" to confirm the BIOS version you want to update and start BIOS Update process.
3. After BIOS update finished, press Yes and then system will restart to take effect
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, press "Yes" and then system will restart to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" Option.
3. Change "UEFI" to "Legacy" Boot Mode.
4. Go to "Exit > Save Changes and Reset" and then reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, press "Yes" and then system will reboot to take effect.
8. Go to BIOS Setup by pressing F2 and go to "Boot > Boot Mode" to change Boot Mode from "Legacy" to "UEFI".
9. Go to "Boot > Secure Boot Control" to change Secure Boot from "Disabled" to "Enabled".
10. Go to "Exit > Save Changes and Reset" and then reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Note 3: Do not turn off power or interrupt BIOS update process during flashing BIOS.