Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Alienware_X51_R2_A06.exe
File size: 10.67 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 7893fcced47c1752cfb682b2ba722ed4
SHA1: 6e2705df41f22ba24c81ac732a519e60b5d107fc
SHA-256: e1187aa2495fde11b1c1ba785e46fd119226f85f08a003ae38d636a6859924e0
Fixes & Enhancements
Fixes
-Not Applicable
Enhancements
- Support Haswell Refresh CPU : i7-4790, i5-4460, i3-4150.
Important Information
ME,Chipset,UMA driver need update for Haswell refresh CPU.
Supported Operating Systems
BIOS
Windows 7, 64-bit
Windows 8, 64-bit
Windows 8.1, 64-bit
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option.
3. Change UEFI to Legacy of Boot List Option.
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing pressing F2 and go to Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Exit Save Changes and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.
Reboot will be required