Dell Data Protection | Access

For Installation of Dell Data Protection | Access solution, you must perform the following in the exact order: (follow all reboots / restarts recommended by the installation utility)
1. Uninstall any prior versions of Dell Data Protection | Access or Dell ControlPoint Security Manager software and drivers (if installed on the computer). Back up any security credentials prior to uninstalling.
2. Install the Dell Data Protection | Access Pre-Requisite package (not required for Windows 7 operating systems)
3. Install the Dell Data Protection | Access Driver package
4. Install the Dell Data Protection | Access Middleware package
5. Reboot system
6. Install the Dell Data Protection | Application package
7. Reboot system The Dell Data Protection | Access Application will install into the Start Menu under Programs\Dell\Dell Data Protection\Access.

Note: No desktop or task tray icons will be placed onto the system by default. For detailed installation instructions, please read the Dell Data Protection | Access Users Guide from support.dell.com -> Manuals -> Software -> Dell Utility -> Dell Data Protection

Hard Drive Installation (via WinZip) with Setup.exe File

Download

1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\48C19" (Where '48C19' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\48C19" (where '48C19' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.