Download Files
File Format: Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
File Name: Memory_Firmware_498KF_WN64_01.02.00.5446_A00.EXE
File size: 5.19 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: fce98f64491566b05042b6c1219b49ad
SHA1: 32c7ad6f2489a6c6bc820fc4a7c3e3ea2dca7aaa
SHA-256: 5a429c34a55553c877b0b81ffd8456d566c8e44a92cf813cb58759eb87d3785b
File Format: The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
File Name: Memory_Firmware_498KF_LN64_01.02.00.5446_A00.BIN.sign
File size: 226 Bytes
To ensure the integrity of your download, please verify the checksum value.
MD5: 0bdc648ffdf61978054e0669c1f5d180
SHA1: b46253281d184fa645224640cefad6a32d4106a1
SHA-256: 21d65ba00d3a57918f2febe2f3cbe861e9cf2e3c067a01a6e6262aa145c59e1d
File Format: Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.<br /><b>Note:</b> Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
File Name: Memory_Firmware_498KF_LN64_01.02.00.5446_A00.BIN
File size: 1.82 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 529ae157976e9589eb64e086eef33784
SHA1: e89710cb1dc49946e21109884c1ba199a9febab5
SHA-256: 4817751d1935ba367fe4c3e487f34b8bf3edbe896896d193a92c580ab71be6b1
Fixes & Enhancements
Addresses intel known issues
Important Information
Once upgrading to 1.2.0.5298 (or later), the DCPMM cannot be downgraded to a FW version prior to 1.2.0.5298.
The firmware payload supplied in the update package can be applied out-of-band through the iDRAC GUI, or Lifecycle Controller shall also apply the update package.
DUP can also be applied using minimum OS versions Windows 2019 and Redhat 7.6 OS.
1. Do not run other applications while executing the update package
2. Do not AC power cycle or reset the system while the update package is executing
3. Depending on the number of DCPMM devices in the system, the update can take several minutes per DCPMM and the progress bar may not be updated regularly
4. The DUP update varies from a minimum duration of 2 minutes to a maximum duration of 10 minutes
Supported Operating Systems
Red Hat® Enterprise Linux 7
Red Hat® Enterprise Linux 8
SuSE Linux ES 15
Windows Server 2019 LTSC
Windows Server 2022 LTSC
VMware ESXi 6.7
VMware ESXi 7.0
Installation instructions
[Recommended] Installation via iDRAC GUI
=================================================================
1. Go to "Maintenance" tab in the iDRAC GUI
2. Navigate to "System Update" tab and upload the DUP package
3. Select the .exe file from the Update Details and select "Install and Reboot"
4. A job queue is created and the system cold resets
5. After the system reset, the DUP update gets staged through the LC
=================================================================
[Recommended] Installation via Lifecycle Controller UI
=================================================================
1. Launch Lifecycle controller(LC) during boot
2. Launch "Firmware Update" from LC UI
3. Select FTP server or local drive that hosts the downloaded DUP and launch the update
4. DUP update gets staged through LC
================================================================
[Alternative] Windows Installation Instructions
=================================================================
1. Ensure the date and time settings in the OS are accurate and up to date
2. Double click on the DUP .exe package
3. Once the prompt pops up, hit "Install"
4. Another prompt pops up with the present and new versions of the FW on the devices
5. Click on "Yes" and proceed to the next stage, click on "Yes" again and the system warm reboots
6. On the next run DUP update is staged through the LC
=================================================================
[Alternative] Linux Installation Instructions
=================================================================
1. Ensure the date and time settings in the OS are accurate and up to date
2. Navigate to the folder that contains DUP bin file.
3. Chmod 777 [DUP bin file]
4. ./[DUP bin file]
5. System will auto reboot
6. On the next run DUP update is staged through the LC
=================================================================
Applies to
Optane DC Persistent Memory