Dell EMC Networking N2000 Series, Firmware Version 6.5.4.4
Restart required Installed This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.5.4.4 as it contains multiple bug fixes.
New CPLD version 20 is available in release 6.5.1.1 and later (6.5.4.4) for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.5.4.4), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.
****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.5.4.4 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.5.4.4 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.5.4.4" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.4.4_6.5.4.34_Release_Notes(N1500_N2000_N3000_N3000E-ON_N4000_PC8100)".pdf"
New CPLD version 20 is available in release 6.5.1.1 and later (6.5.4.4) for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.5.4.4), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld
****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.5.4.4 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****
Downgrading N3000 and N2000 Series switches from firmware version 6.5.4.4 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.
With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.5.4.4" procedure.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.5.4.4_6.5.4.34_Release_Notes(N1500_N2000_N3000_N3000E-ON_N4000_PC8100)".pdf"
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
FIELD-3614,CS7611458-Radius key length > 48 bytes results in failed login (SSH/Telnet) authentication
FIELD-3573,CS7472237-System LED reports a non-critical error
FIELD-3658,CS7727848-Stack LED is off on Stack Master
FIELD-DNSE,CS8128255-Ping is not working on VRF leaked routes.
Enhancements:
None
Read MoreFIELD-3614,CS7611458-Radius key length > 48 bytes results in failed login (SSH/Telnet) authentication
FIELD-3573,CS7472237-System LED reports a non-critical error
FIELD-3658,CS7727848-Stack LED is off on Stack Master
FIELD-DNSE,CS8128255-Ping is not working on VRF leaked routes.
Enhancements:
None
Version
6.5.4.4, A47
Release date
28 Jun 2019
Download Type
Operating Systems
Category
Network, Ethernet & Wireless
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: N2000v6.5.4.4.A47.zip
File Size: 169.32 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
91d7f2d1cdbf709485a2aa871ed0f7e9
SHA1:
6f27dbd11bd6e9cf3ac9a195b18c23b0b7a5c733
SHA-256:
cc65aa66359147744dcacf0ffde899d02ff41d9698f6c854bb9bee23bdb35a1d
File Format: A text file containing customer friendly fixes and enhancements information
File Name: N2000ReadMev6.5.4.4.A47.txt
File Size: 4.04 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
4c7e1cad5730409204892523f6328ec5
SHA1:
f807515f4ba1f938b0977c4ea9b83326ae8daf16
SHA-256:
ca3372e5ab47e3dc27e17476680054886fad1c05259a191ec3b2db62b7b8f26c
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Fixes:
FIELD-3614,CS7611458-Radius key length > 48 bytes results in failed login (SSH/Telnet) authentication
FIELD-3573,CS7472237-System LED reports a non-critical error
FIELD-3658,CS7727848-Stack LED is off on Stack Master
FIELD-DNSE,CS8128255-Ping is not working on VRF leaked routes.
Enhancements:
None
FIELD-3614,CS7611458-Radius key length > 48 bytes results in failed login (SSH/Telnet) authentication
FIELD-3573,CS7472237-System LED reports a non-critical error
FIELD-3658,CS7727848-Stack LED is off on Stack Master
FIELD-DNSE,CS8128255-Ping is not working on VRF leaked routes.
Enhancements:
None
Applies to
Dell N2024
Dell N2024P
Dell N2048
Dell N2048P
KIT,SWT BOX,24PRT,1GBE,N2024
Installation instructions
(1) Download the zip file - N2000v6.5.4.4.A47.zip
(2) Extract the image file "N2000Stdv6.5.4.4.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.5.4.4 Firmware.pdf" extracted from zip file.
(2) Extract the image file "N2000Stdv6.5.4.4.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000 Series Switches From version 6.x.x.x to 6.5.4.4 Firmware.pdf" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting guideDrivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.