Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 3135A02.exe
File size: 6.84 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: aee08d1864f3468952ba00be2a4eaaf8
SHA1: c0da8c496887de4b1bc71d159cf329b2284efc4a
SHA-256: 5fd0474675974f4db73c7badc125f6641e7fa925c8b112653b55a659e9f19b2f
Fixes & Enhancements
Fixes
-Fixed an issue which cause "non-convert" key on JPN keyboard lost function
Enhancements
-Not Applicable
Important Information
Please update to BIOS A01 before update BIOS A02.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing pressing F2 and go to Boot > Boot List Option
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Exit Save Changes and reboot system
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sureyou suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required