Seagate BARRACUDA (3.5",SATA,6Gb/s,7200,512) Firmware Update

1) Please close other applications before updating.
2) While the firmware is updating, please don't turn off the computer.

Windows based firmware update for ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Download and unzip B765JC47.zip into your desktop.
2. In B765JC47 folder, please search for the Windows folder.
3. Double click B7032100.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click I agree and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the Begin firmware update procedure, and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.

DOS based firmware update for ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Unzip B765JC47.zip into your bootable USB key. Boot up the computer with USB key.
2. In Dos folder, just type JC47.BAT at the DOS prompt and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a DRIVE PASSED message. If you already have the correct JC47 firmware on your hard drive, you will get a This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE message.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.