Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: 3737A07.exe
File size: 12.11 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: d9326f1f1db5beefe19b4d89b666c132
SHA1: bc1ca14153d9d504a4a31ff1f5f2577e84f0bec4
SHA-256: c28e8d2dc4daa4580a4b8e39249063e5eb03732b874c6c39c73e51d92f6a7cb1
Fixes & Enhancements
Enhancements:
- Fix CPU keep at high speed after resume from S3 with Speedstep disabled
- Adjusts the PCH SATA HDD Gen3 Rx equalization for RX test fail
- Integrated Microcode to to M7240651_00000017
Supported Operating Systems
Installation instructions
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
9. Change "Legacy" to "UEFI" Boot Option.
10. Go to "Exit > Exit Save Changes" and reboot system.
Reboot will be required
Applies to
Dell Inspiron 5737/3537/3737/5537 and Vostro 2521